2012年2月29日 星期三
Check Back
check back (with someone)
to inquire of someone again at a later time. Please check back with me later.
check back
2012年2月28日 星期二
2012年2月27日 星期一
2012年2月23日 星期四
2012年2月22日 星期三
2012年2月21日 星期二
2012年2月20日 星期一
2012年2月17日 星期五
Apple’s Toughest Competition in the Fourth-Quarter Tablet Market Was…Apple - The Display Materials & Systems portal at iSuppli® offers the latest in TV market research and trends. Our expert analysis provides the latest news in television research & statistics. To learn more, call us at 1.310.524.4007. at iSuppli
2012年2月16日 星期四
2012年2月15日 星期三
Lin legend grows with comeback victory over Raptors
- comeback:
(1) a return to a former higher rank, popularity, position, prosperity
(2) a clever or effective retort
(3) Informal . a basis or cause of complaint
- douse
to stop a fire from burning by pouring water on it
- dose
the amount of a medicine or a drug that you should take
- point guard (控球後衛)
- pissed
(1) pissed(小便) 的過去式或過去分詞,
I was pissed by the litttle boy on my shoes. 一個小男孩尿在我鞋子上
(2) pissed(英式英文) 是指 druck 喝醉的意思
Let us go get pissed. 我們去喝個大醉吧
(3) pissed(美式英文) 是指 mad ; extremely angry 生氣或非常生氣
When I found that she lied to me, I was pissed. 當我發現她對我說謊時,我氣死了
Good, she needs a good dose of reality（氣得好，她需要體會一下生活現實面。 ）
- was about to be doused with its first dose of reality
(1) a return to a former higher rank, popularity, position, prosperity
(2) a clever or effective retort
(3) Informal . a basis or cause of complaint
- douse
to stop a fire from burning by pouring water on it
- dose
the amount of a medicine or a drug that you should take
- point guard (控球後衛)
- pissed
(1) pissed(小便) 的過去式或過去分詞,
I was pissed by the litttle boy on my shoes. 一個小男孩尿在我鞋子上
(2) pissed(英式英文) 是指 druck 喝醉的意思
Let us go get pissed. 我們去喝個大醉吧
(3) pissed(美式英文) 是指 mad ; extremely angry 生氣或非常生氣
When I found that she lied to me, I was pissed. 當我發現她對我說謊時,我氣死了
Good, she needs a good dose of reality（氣得好，她需要體會一下生活現實面。 ）
- was about to be doused with its first dose of reality
2012年2月13日 星期一
2012年2月12日 星期日
CFM
https://forum.openwrt.org/viewtopic.php?pid=150142
There is no ROM to boot from; at power up the CPU begins executing the code at the very start of flash. Luckily this isn't the firmware or we'd be in real danger every time we reflashed. Boot is actually handled by a section of code we tend to refer to as the boot loader. In Broadcom devices this is CFE -- "Common Firmware Environment"; think of it like the BIOS in your computer.
The job of the boot loader is to initialize the memory and other hardware and then begin booting the firmware. In most cases there's a recovery mechanism that allows you to reflash the firmware so that a bad flash doesn't render the device useless. CFE does this through the use of a TFTP server; this can be triggered by the firmware not matching the firmware checksum, the boot_wait variable or via CFE's serial console command line.
There is no ROM to boot from; at power up the CPU begins executing the code at the very start of flash. Luckily this isn't the firmware or we'd be in real danger every time we reflashed. Boot is actually handled by a section of code we tend to refer to as the boot loader. In Broadcom devices this is CFE -- "Common Firmware Environment"; think of it like the BIOS in your computer.
The job of the boot loader is to initialize the memory and other hardware and then begin booting the firmware. In most cases there's a recovery mechanism that allows you to reflash the firmware so that a bad flash doesn't render the device useless. CFE does this through the use of a TFTP server; this can be triggered by the firmware not matching the firmware checksum, the boot_wait variable or via CFE's serial console command line.
2012年2月11日 星期六
English for Overcurrent Circuit Protection
-compliance with safety agency standards
-provide a uniform protocol for the addition and configuration of computer peripherals
-The USB is viewed as an inexpensive system for
-It is designed to accommodate transmission rates up to
-can be powered by a hub through the communication cable without additional power inputs
-The bus is designed to sense the addition or removal of a USB-compliant device and then automatically configure accordingly.
-select the correct components in conjunction with
(1)resettable polymer PTCs (positive-temperature-coefficient devices), (2)fuses, and (3) regulated networks
-the most commonly employed solutions
-Fuses are one-time devices
-a fuse will provide protection from an overload only once, then it needs to be replaced.
-The heart of a traditional fuse is a metal element that is heated to its melting point by any excessive current.
-The circuit current flow decreases to zero as the element melts open, destroying the fuse.
-The PTC also reacts to the occurrence of excessive current, but unlike the fuse is a resettable device.The PTC also reacts to the occurrence of excessive current, but unlike the fuse is a resettable device.
-The PTC's conductive polymer increases in resistance when heated by an overload, and this limits the circuit current. When the power source is removed, the device resets itself.
-Regulated networks, or power-distribution switches, which combine a number of functions in one package, have also been put forward as resettable solutions for port protection.
-limiting potentially damaging overcurrent when the current exceeds the specified rating.
-in this respect
-The USB standard organization defines a nominal operating voltage of 5 V and a hub operating current of 0.500 A per port.
-provide a uniform protocol for the addition and configuration of computer peripherals
-The USB is viewed as an inexpensive system for
-It is designed to accommodate transmission rates up to
-can be powered by a hub through the communication cable without additional power inputs
-The bus is designed to sense the addition or removal of a USB-compliant device and then automatically configure accordingly.
-select the correct components in conjunction with
(1)resettable polymer PTCs (positive-temperature-coefficient devices), (2)fuses, and (3) regulated networks
-the most commonly employed solutions
-Fuses are one-time devices
-a fuse will provide protection from an overload only once, then it needs to be replaced.
-The heart of a traditional fuse is a metal element that is heated to its melting point by any excessive current.
-The circuit current flow decreases to zero as the element melts open, destroying the fuse.
-The PTC also reacts to the occurrence of excessive current, but unlike the fuse is a resettable device.The PTC also reacts to the occurrence of excessive current, but unlike the fuse is a resettable device.
-The PTC's conductive polymer increases in resistance when heated by an overload, and this limits the circuit current. When the power source is removed, the device resets itself.
-Regulated networks, or power-distribution switches, which combine a number of functions in one package, have also been put forward as resettable solutions for port protection.
-limiting potentially damaging overcurrent when the current exceeds the specified rating.
-in this respect
-The USB standard organization defines a nominal operating voltage of 5 V and a hub operating current of 0.500 A per port.
2012年2月5日 星期日
2012年2月4日 星期六
Why the Internet of Things finally makes sense
https://plus.google.com/105910977869522122580/posts/jMwPjczvW6j#105910977869522122580/posts/jMwPjczvW6j
2012年2月3日 星期五
2012年2月2日 星期四
訂閱：
文章 (Atom)